防振复合物和螺纹锁固剂

Vibra-Stop 是一种强大的减振涂层，适用于紧固件和其他装配部件。 它可以防止螺钉，螺母，螺栓和所有类型零件的松动和泄漏。 该产品独特的弹性允许拆卸，重新调整和重新安装组件。Vibra-Stop 设计成具有成本效益且不含CFC。 3 级产品是一种非臭氧消耗的甲基丙烯酸树脂和共聚物配方，可防止紧固件松动，即使在极端振动下也是如此。该配方是非厌氧和非反应性的。 与厌氧粘合剂不同，该产品不会降解塑料，将部件抓取到位或依赖于化学反应。

产品特点：

» 卓越的保质期：涂有 Vibra-Stop 的部件可在使用前无限期保存。

» 多功能：Vibra-Stop 适用于所有类型的零部件，不仅仅是紧固件。 当涂有Vibra-Stop 时，铆钉，销，轴，轴环，弹簧，旋钮，端子等都会受益。

» 表面不敏感：与大多数厌氧胶不同，Vibra-Stop 适用于黑色金属和有色金属以及大多数螺丝类型，包括木材，塑料和镀金产品。 »提供可靠的锁定和密封：Vibra-Stop可在各种条件下固定零件，即使是在极端振动环境下。

» 多次重复使用：涂有 Vibra-Stop 的零部件无需重新涂胶即可轻松调整，移除和重复使用。

» 最小化磨损/脱落：Vibra-Stop 是一种弹性绝缘涂层，有助于减少磨损和螺纹损坏。

» 低成本：VibraStop 的价格远远低于厌氧粘合剂和竞争对手产品。

使用方法：

将Vibra-Stop 大量应用于螺纹区域以进行装配，待其干燥。然后便可以安装或无限期地存放紧固件以供以后使用。 Vibra-stopρ可用于公螺纹和母螺纹,甚至可用于非螺纹应用。使用后,Vbra-stop会在几秒钟内干燥,只需几分钟即可完成装配零部件的准备。在使用之前不需要部分脱脂

可用等级：

＊注：11级气溶胶与我们的标准3级产品相当，添加了溶剂．可能会有运输限制．

规格说明：

DESCRIPTION:

Vibra-Stop is a powerful vibration-damping coating for use on fasteners and other assembly components. It prevents loosening and leaking of screws, nuts, bolts, and parts of all types. The product’s unique resiliency allows for removal, readjustment and reinstallation of components.Vibra-Stop is engineered to be cost-effective and CFC-free. The Grade 3 product is a non-ozone depleting formulation of methacrylic resins and copolymers that prevents fasteners from loosening, even under extreme vibration.The formula is non-anaerobic and nonreactive. Unlike anaerobic adhesives, this product does not degrade plastics, seize parts in place or depend on a chemical reaction.

PRODUCT FEATURES:

» Exceptional Shelf Life: Parts coated with Vibra-Stop can be stored indefinitely before use.

» Versatile: Vibra-Stop can be used on components of all types, not only fasteners. Rivets, pins, shafts, collars, springs, knobs, terminals, etc. can benefit when coated with Vibra-Stop.

» Surface Insensitive: Unlike most anaerobic adhesives, Vibra-Stop adheres to both ferrous and nonferrous metals and to most screw types including wood, plastic and plated.

» Provides a Reliable Lock & Seal: VibraStop holds parts in place under a wide range of conditions; even during extreme vibration.

» Multiple Reuse: Parts coated with Vibra-Stop can easily be adjusted, removed, and reused without reapplication.

» Minimizes Galling/Stripping: Vibra-Stop is a resilient insulation coating that helps reduce galling and thread damage.

» Low Cost: Vibra-Stop is priced far less than anaerobic adhesives and competing products.

METHOD OF USE:

Apply Vibra-Stop liberally to threaded area to be engaged in assembly; allow to dry. Fastener can then be installed or stored indefinitely for later use. Vibra-Stop is usable on male and female threads, and even in non-threaded applications. When applied, Vibra-Stop dries within seconds leaving coated parts ready for assembly in just a few minutes. Part degreasing is not required prior to application.

*Note: Grade 11 Aerosol is comparable to our standard shelf Grade 3 product, with added solvent . Shipping restrictions may apply.